Zobacz koszyk “POLYPLUS-BLUE” został dodany do koszyka.

Notice: Korzystanie z WC_Product::get_gallery_attachment_ids uznawane jest za przestarzałe od wersji 3.0! Zamiast tego użyj WC_Product::get_gallery_image_ids. in /home/domalacny/domains/reklamy24.info/public_html/wp-includes/functions.php on line 3938

ABS-FILAMENT

Moisture laden ABS will tend to bubble and spurt from the tip of the nozzle when printing; reducing the visual quality of the part, part accuracy, strength and introducing the risk of a stripping or clogging in the nozzle. ABS can be easily dried using a source of hot (preferably dry) air such as a food dehydrator.

14.00

Debugowanie w WordPressie. (Ten komunikat został dodany w wersji 3.0.) in /home/domalacny/domains/reklamy24.info/public_html/wp-includes/functions.php on line 4246
496" />

Moisture laden ABS will tend to bubble and spurt from the tip of the nozzle when printing; reducing the visual quality of the part, part accuracy, strength and introducing the risk of a stripping or clogging in the nozzle. ABS can be easily dried using a source of hot (preferably dry) air such as a food dehydrator.

For most, the single greatest hurdle for accurate parts in ABS will be a curling upwards of the surface in direct contact with the 3D Printer’s print bed. A combination of heating the print surface and ensuring it is smooth, flat and clean goes a long way in eliminating this issue. Additionally, some find various solutions can be useful when applied beforehand to the print surface. For example, a mixture of ABS/Acetone, or a shot of hairspray.

For fine features on parts involving sharp corners, such as gears, there will often be a slight rounding of the corner. A fan to provide a small amount of active cooling around the nozzle can improve corners but one does also run the risk of introducing too much cooling and reducing adhesion between layers, eventually leading to cracks in the finished part.

  • Overall Dimensions - 338 x 358 x 389 mm
  • Build Volume - 230 x 225 x 205 mm
  • Print Speed - 30 - 300 mm/s
  • Maximum Resolution - 0.02 mm (20 micron)
  • Print from SD Card - yes
  • Print Material - 3mm ABS or PLA
  • Noise Level - 49db
  • Recommended Software - Cure
ABS-FILAMENT

There are no reviews yet.

Be the first to review “ABS-FILAMENT”


Notice: Korzystanie z WC_Product::get_related uznawane jest za przestarzałe od wersji 3.0! Zamiast tego użyj wc_get_related_products. in /home/domalacny/domains/reklamy24.info/public_html/wp-includes/functions.php on line 3938

Notice: Funkcja id została wywołana nieprawidłowo. Właściwości produktu nie powinny być dostępne bezpośrednio. Dowiedz się więcej: Debugowanie w WordPressie. (Ten komunikat został dodany w wersji 3.0.) in /home/domalacny/domains/reklamy24.info/public_html/wp-includes/functions.php on line 4246